Stanley Battery Clips Water Pump (DCP30100)

The DCP30 water pump is intended to be used to supply water to the chain and bar on Stanley Diamond Concrete Chain Saws and other diamond chain saw brands as well.

• The 12 VDC Water Pump is a three chamber positive displacement diaphragm pump. This pump will deliver water flow to a pressure of 45 psi.
• The Water Pump has a built-in pressure switch which will automatically shut off the pump when pressure reaches 45 psi. The switch will turn on the pump when pressure drops to 30 psi. The settings of the pressure switch are preset and cannot be adjusted.
• The Water Pump is self-priming. It will draw water up to a maximum lift of 8 feet.
• The diaphragm construction allows the pump to run dry without damage. There are no rotating seals to wear or leak.
• The built-in thermal protection will automatically shut off the pump before it is damaged by overheating. The shut off will automatically reset after the pump cools.
• The pump has a finned heat sink for cooling. This makes the pump a continuous-duty pump.
• The built-in check valve maintains water pressure after the pump shuts off. It also prevents water from flowing back into the water supply. If your water supply is from a potable water source, water in the pump outlet will not flow back into the water system.
• A strainer is provided in the suction line to prevent debris from entering the pump. The strainer is easily disassembled for cleaning. The clear cover allows you to see the condition of the strainer.
• The current draw will be between 3.6 and 15 amps, depending on outlet pressure.