Portable - Includes roll cage and wheel kit (standard)
Oil-less design eliminates OSHA required CO monitors, temperature alarms, airline filters
Liquid-filled pressure gauge (0-100 psig)
1/2 in Industrial Interchange (Hansen compatible) quick-disconnect coupler - At least 100 ft of 1/2 in ID breathing air supply hose is required for proper performance
Air flow of 8 cfm at 60 psig (225 lpm @ 400 kPa)
Maximum Outlet Air pressure of 60 psig (400 kPa)
Does not need to be bolted down
No calibration required
Breathable air inlets (4) can be located up to 300 feet away from pump
Internal Thermal Overload
Medium Efficiency Inlet Filters (particulates larger than 25 microns filtered out of the air supply). Replace after 500 operational hours or less depending on working conditions
May be used in conjunction with any manufacturer's NIOSH-approved supplied air respirators. Check the respirator's owner's manual to verify pressure and CFM requirements
