Stanley Core Drill OC (CD12)

Product Description

The Stanley CD12 Core Drill is well suited for drilling concrete, masonry and asphalt materials. It is operated mounted in a drill stand included with the drill motor. The CD12 maintains speed regardless of drill load improving the life of the bits.

The CD12 has a three-speed gearbox. This provides a speed selection to match the best speeds for the range of drill bits. Changing speeds is easily done with the speed selector on the drill. The gearbox is equipped with a clutch to protect the gear set from overload while delivering torque sufficient for the larger bits.

The ON/OFF directional spool valve is detented to stay ON to reduce operator fatigue. Water can be delivered either from a
hydrant connection or from the 4-gallon pressure tank accessory. The water connection on the CD12 is fitted with a valve so the water can be controlled at the drill.

The drill stand can be adjusted to enable drilling holes at any angle from perpendicular to 45 degrees. The drill stand can be anchored to the material to be drilled by setting an anchor screw or by using a vacuum pump.

The drill stand has leveling screws to set the stand solidly on the surface to be drilled.The feed handle can be installed from either right-hand or left-hand operation.

Wrenches are included for loosening and removing drill bits.